Angles Morts Truck - Aluminium
Verzending binnen Nederland en België.
98% van de bestellingen zijn na verzending de volgende werkdag in huis.
Twijfel niet langer! Omdat wij zeker zijn van de kwaliteit van onze producten kan je het product 30 gratis uitproberen!
The AutoXtreme Angles Morts marking for trucks is reflective. Most competitors do not offer that. A plain sticker does the job in daylight, but is barely visible in the dark and in poor conditions. The retroreflective film bounces light straight back, so the marking stays visible at night to other road users and to enforcement. Sturdy aluminium frame, supplied complete with mounting hardware, and compliant with article R.313-32-1 of the French highway code.
When are you legally required to use this product?
France
Since 1 January 2021 the Angles Morts marking has been required throughout France on all trucks with a maximum permitted mass above 3,500 kg. This applies to French and foreign vehicles alike. At least 3 markings are needed per vehicle: on both sides within 1 metre of the front, and at the rear on the right-hand side. A truck with a semi-trailer needs at most 6 markings. Fitting height: at least 90 cm and at most 150 cm above the ground. Driving without valid marking carries a fine of 90 euros minimum up to 750 euros maximum.
Visibility
The law requires a marking, but sets no requirement for retroreflection. A non-reflective sticker is barely visible during a night-time check or in poor conditions. The AutoXtreme marking uses retroreflective film and meets the highest visibility requirements. TÜV SÜD certified and E8 approved.
The aluminium version suits trucks in daily use where a fixed, durable fitting is needed.
Features of the AutoXtreme Angles Morts marking Truck aluminium
- Dimensions: 17 x 25 cm. Compliant with article R.313-32-1 of the French highway code.
- Retroreflective: visible by day and in the dark, also in rain and poor visibility.
- Aluminium frame: stands up to vibration, temperature swings and long-term outdoor use.
- Mounting hardware included: ready to fit without extra purchases.
- TÜV SÜD certified: independently tested for quality and safety.
- E8 approval: accepted at French roadside inspections.
- Weather resistant: UV resistant and water resistant.
- Fitting requirement: at least 3 per vehicle. Both sides within 1 metre of the front, and the rear right-hand side. Height: min. 90 cm and max. 150 cm above the ground.
- Suitable for: truck, tractor unit and semi-trailer.
- 3 year warranty on the reflective performance.
Package contents
- 1x Angles Morts marking aluminium (17 x 25 cm)
- 1x mounting hardware
This product comes with a 3 year warranty on its reflective performance.